What Is The Value Of Sin 36 Degrees?
Sin 36 Degrees is exactly , which works out to about when rounded to four decimal places. The same angle in radians is , so you may also see this written as .
Both forms describe the same number. The surd is the exact value, useful when a later step needs to cancel or simplify. The decimal is the value you would read off a calculator, useful when you just need a number.
To check the decimal by hand: , so . Then , and dividing by gives . The exact surd and the decimal agree.
For a refresher on what "sine of an angle" means in the first place, see the sine function and the wider family of sin, cos, and tan.
How Do You Find Sin 36 Degrees On The Unit Circle?
On the unit circle, is the height (the -coordinate) of the point where the angle's arm meets the circle. Draw the radius at measured anticlockwise from the positive -axis, and the point where it lands is .
The height of that point is , and that height is .
Because is between and , the arm stays in the upper-right block of the circle, Quadrant I, where both coordinates are positive. That is the whole reason comes out positive.
You can build the same picture as a right triangle: drop the vertical line from the point to the -axis, and you get a right triangle whose hypotenuse is the radius , whose height is , and whose base is . For the version of the circle that also carries the tangent line, see the unit circle with tangent.
How Do You Derive The Exact Value Of Sin 36 Degrees?
The clean route is to find first, then use the Pythagorean identity. The angle is friendly because , which lets one angle equation pin the value down.
Step 1: Set up an equation from .
Let . Write and . Since , taking cosine of both sides gives:
Step 2: Expand both sides with double- and triple-angle formulas.
Using and with :
Step 3: Rearrange into a polynomial and factor.
Since is a root, factor it out:
The angle gives a positive cosine, so discard and solve the quadratic .
Step 4: Solve the quadratic.
Keeping the positive root:
Step 5: Convert to with the Pythagorean identity.
Taking the positive square root (Quadrant I):
That is the exact value, derived from nothing but the angle relationship and two standard identities. For the identity toolkit used here, see the sum and difference identities.
Why Is Sin 36 Degrees Tied To The Golden Ratio?
The surd looks complicated, but the reason it exists at all is simple: is the angle of a regular pentagon, and the pentagon is built on the golden ratio.
The pentagon angle. A regular pentagon's central angle is , and half of that is . Every diagonal you draw inside a pentagon or a five-pointed star produces angles. See the angles in a pentagon for where they all sit.
The golden ratio appears directly. The golden ratio is , and the cosine we derived is exactly half of it: .
Constructible with straightedge and compass. Because a regular pentagon can be drawn with only a ruler and compass, its angle has a value expressible in square roots. Most angles (like or ) have no such clean form, but does.
That is the deep reason has an exact surd while a nearby angle like does not. The value is not an accident of trigonometry, it is geometry: the arithmetic of the five-sided shape.
What Is Sin 36 Degrees In Terms Of Other Angles?
The pentagon family (18°, 36°, 54°, 72°) all share the same golden-ratio DNA, so their sines and cosines swap around in a tidy pattern. Notice how and are the same number, and equals .
Table: The pentagon-family angles in degrees, radians, and exact sine and cosine.
Angle | Radians | ||
|---|---|---|---|
The swap between and is the co-function relationship: since , we get and . To see next to the more familiar , , and , use the trigonometric table and the trigonometric ratios of specific angles.
Two more forms of the same value are worth knowing:
As a tangent-ratio input: .
In radians: , which is the form you will meet in calculus. For the degree-to-radian idea behind this, see what is a radian.
Who Discovered The Value Of Sin 36 Degrees?
The value of was known, in effect, more than two thousand years before anyone wrote "." It came out of the problem of drawing a perfect five-pointed shape.
Two later figures completed the picture:
Claudius Ptolemy (around 100–170 CE, Alexandria) computed the chord of in the Almagest, giving the first numerical stand-in for used in astronomy.
Carl Friedrich Gauss (1777–1855, Germany) explained which angles have exact surd values at all, proving the deep link between constructible polygons and expressible trigonometric values, the theory that says qualifies and does not.
Where Is Sin 36 Degrees Used In The Real World?
The pentagon angle turns up wherever five-fold symmetry or the golden ratio does.
Nature and biology: starfish, many flowers, and the seed spirals of a sunflower show five-fold or golden-ratio spacing, and modelling that geometry uses the and angles directly.
Architecture and design: pentagonal and star-shaped floor plans, domes, and decorative tiling rely on the exact pentagon angle to close up cleanly, from the Pentagon building to Islamic geometric art.
Engineering and antennas: pentagonal and five-element arrays, and some gear and bolt patterns, are laid out on multiples of .
Computer graphics: drawing regular pentagons, five-pointed stars, and golden-ratio spirals means placing vertices at steps, so and set the coordinates.
Crystallography: quasicrystals, which stunned scientists by showing five-fold symmetry once thought impossible, are described with pentagon-angle geometry.
One angle, born from a five-sided shape, quietly sets the coordinates for starfish, star patterns, and screens alike.
What Are The Most Common Mistakes With Sin 36 Degrees?
These four errors account for most lost marks on specific-angle problems, and each has a clean fix.
Reading the calculator in the wrong mode.
Where it slips in:
A student types and while the calculator is set to radians, and reads off instead of .
Don't do this:
Do not trust the number before checking the angle unit. In radian mode, "" means radians, a completely different angle.
The correct way:
Set the calculator to degree (DEG) mode for , or convert first: , then use in radian mode. Both give .
Getting the sign wrong on a related angle.
Where it slips in:
A student assumes any angle near is positive, then writes .
Don't do this:
Do not carry the Quadrant I sign into other quadrants. Use the ASTC (All, Sin, Tan, Cos) rule to fix the sign.
The correct way:
itself is positive (Quadrant I). But , because lands in Quadrant III where sine is negative.
Misidentifying the reference angle.
Where it slips in:
Asked for , a student uses as the reference angle instead of finding the acute angle to the -axis.
Don't do this:
Do not plug the full angle into the surd form. The exact value belongs to the reference angle, not the original.
The correct way:
The reference angle of is , and is in Quadrant II where sine is positive, so .
Confusing the co-function.
Where it slips in:
A student writes , mixing up the two values of the same angle.
Don't do this:
Do not equate sine and cosine of the same angle. but , they are different numbers.
The correct way:
The correct co-function swaps the angle: . Sine of an angle equals cosine of its complement, not cosine of itself.
Practice Problems On Sin 36 Degrees
Try each, then check the answer that follows.
Write in exact surd form and to four decimal places.
(Answer: .)Convert to radians.
(Answer: rad.)Use a co-function identity to rewrite as a cosine.
(Answer: .)Given , verify .
(Answer: .)Find to four decimal places using and .
(Answer: .)In which quadrant does lie, and is positive or negative?
(Answer: Quadrant I, and is positive.)
Where Should You Go Next After Sin 36 Degrees?
The pentagon angle opens several natural doors.
Trigonometric ratios of specific angles. Line up with , , and and learn the whole set of exact values together.
Cofunction identities. The rule behind , and how to convert any sine into a cosine.
Trigonometric table. A single reference for sine, cosine, and tangent across the common angles.
If your child is building these foundations, a live Bhanzu trainer teaches specific-angle values starting from the "why" (the pentagon and the unit circle behind each number) in the Bhanzu trigonometry program.
Was this article helpful?
Your feedback helps us write better content